Sintered Mesh Filter Cartridge

Sintering can be used on most kinds of woven wire meshes.Sintered Wire Mesh bond all wires together at a specific temperature, to eliminate the migration of the medium. It can be bond at one time through the vacuum furnace sintering process. After the proper sintering, almost every point can be firmly fused, and even a circular hole can be generated from the mesh laminates without damage, which is crucial in many applications.

• Filer rating:2-200 μm

• Length:10", 20", 30", 40" or customized

• Diameter:65 mm, 70 mm or customized

• Connection type:M42, M30, M32, M20, 215, DOE, 226, 222 or customized

• Seal material:Silicon, NBR, EPDM, VITON

• Operating temperature:-200 °C to 650 °C.

• Permeability:0.02–20 L/cm²·min·pa

• Operating pressure:1 bar

Sintered mesh filter cartridges are suitable for filtering high temperature and acid-base environments and are widely used in the following industries.

• Petrochemical. Separation and recovery of refining, chemical production and intermediate products;

• Metallurgy. Filtration for hydraulic systems of rolling mills and continuous casting machines;

• Textile. Purification and uniform filtration of polyester melt during drawing;

• Food & beverage. Food & beverage water filtration;

• Electronics and pharmaceuticals. pre-treatment filtration of reverse osmosis water, deionized water, pretreatment filtration of washing liquid and glucose;

• Thermal power and nuclear power. Gas turbine, boiler lubrication system, speed control system, bypass control system oil purification, feed water pump, fan and dust removal system purification