The wire-wound filter element is made of microfiber, which is wound on a porous support frame according to a certain aperture gradient. Its filtration rating ranges from 1um to 50um. Tight inside and loose outside structure, with good deep filtration performance. Good pre-filtration performance and cost effectiveness make it widely used in nominal filtration.
Precision grade: 1,3,5,10,20,30,50μm
Outer Diameter: 2.5inch
Inner Diameter: 1.2inch
Length:5,10,20,30,40,50inch
Filter material: Polypropylene,cotton thread,fiberglass
Support the skeleton: Polypropylene,Stainless steel
Operating condition | |||
Filter material | Support the skeleton | Working temperature | Maximum differential pressure |
polypropylene | polypropylene | < 140°F / 60°C | 35psid@77°F /2.45bard@25°C |
polypropylene | Stainless steel | < 194°F / 90°C | 35psid@77°F /2.45bard@25°C |
cotton(line) | Stainless steel | < 302°F / 150°C | 57psid@77°F /4.0bard@25°C |
The glass fiber | Stainless steel | < 482°F / 250°C | 57psid@77°F /4.0bard@25°C |
String-wound depth filtration structure,high throughput
Wide chemical compatibility, adapts to acid-alkali and organic solvent filtration
High dirty holding capacity, long service life.
Internal tight and external loose structure, good pre-filtration.
Full polypropylene or absorbent cotton structure, good chemical compatibility.
For any plant manager or engineer, centrifuge screen leakage and premature wear are more than just annoyances—they're costly problems. They lead to lost product, inconsistent separation, frequent downtime, and high replacement costs. The root cause is often simple: screens deform under tremendous ce
Read More