Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Scraper self cleaning filter is specially designed for high viscosity liquid filtration. It can automatically remove particles and impurities on the inner surface of filter screen through mechanical scrapping. It allows for continuously online filtration and is suitable for places where no additional substance for back washing can be introduced. We offer both inner scraper self-cleaning filters and outer scraper self-cleaning filters to meet a variety of challenges you may encounter in industrial production. | |||||||||
TSW series Self-cleaning filters are designed specifically to provide efficient filtration for liquids, including those of high viscosity(liquids of viscosity up to 800000cps), requiring continuous filtration without interruption to the flow during the cleaning process. There is no operator contact with the process fluid. High quality stainless steel elements are highly effective in removing contaminant particles as small as 25 micron (μm).
TSW filter solve the customer frequent manual cleaning, large investment, heavy work, material waste serious problems by its advanced self-cleaning always regularly keep the filter element clean, exhaust the waste liquid with high concentration of impurities, reduce material waste, filter poor water quality and adhesive materials such as adhesives, resins, polymers, fats and other advantages, higher efficiency.
Sub-series | TSW-11/TSW-22/TSW-34/ TSW-75/TSW-100/ TSW-136 | Gear Motor | 180W, three phase, 380V, protection class IP55, worm reduction gear |
Filter Area(㎡) | 0.11/ 0.22/ 0.34/ 0.75/ 1/ 1.36 | Inlet and Outlet Standard | Flange, HG20592-2009(standard), HG20615-2009(ANSI B16.5 Compatible);DIN11851 |
Volume(L) | 16~320 | Filter Element Type | V-SLOT slotted metal filter element, 316L material |
Inlet&Outlet Size | DN40-DN50 DN50-DN80 DN50-DN100 DN65-DN100 DN80-DN125 DN100-DN150 | Housing Wet Part Material | 304/316L/CS |
Drain Size | DN40 DN40 DN50 DN50 DN50 DN50 | Piston Material | 316L |
Applicapable Liquid | water and viscous liquids(<800,000cps), impurity<1000ppm | Scraping Blade Material | PTFE |
Filtration Degree | 25-500μm | Housing Seal Material | NBR丁/VITON(FKM) |
Standard Design Pressure | 1.0MPa, high design pressure available | Pistion Seal Material | NBR/PU/VITON |
Design Temperature | 0-200℃(depend on the seal material) | Discharging Valve | Pneumatic ball valve, protection class IP65 |
Cleaning Differential Pressure | 0.05MPa | Supply Facility Requirement | 380V AC,0.4-0.6MPa clean and dry compressed air |
Differential Pressure Instrument | Differential pressure transmitter(DPT)/ Differential Pressure Switch(DPS) |
Fully automatic operation, 24-hour continuous on-line filtration;
Automatically discharge waste liquids containing high concentration impurities that can be recycled to reduce the loss of high value materials;
Closed filtration to prevent the leakage of hazardous materials and ensure the work safety and employee health;
Metal sheet scraper is employed, which makes the gap between the scraper and the filer element is small. Filter elements are provided with accurate slots and extremely smooth surface, which makes it easy to clean and avoid crushing impurities;
Backwash function can be added to help cleaning filter elements;
PLC-based control system is adopted to control scraping and draining time;
Pre-assembled and tested for easy installation.