Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
TZS Series Candle Filter is a self-cleaning filter specially designed for solid-liquid separation, typically used for the clarification and recovery of liquids with low solids content from 5 % to less than 1 % or even trace amounts of solids. | |||||||||
TZS Series Candle filter, also known as a candle diatomaceous earth filter, is a self-cleaning filter specifically designed for solid-liquid separation. It is typically used for clarifying and recovering liquids with solid content ranging from 5% to below 1%, or even trace amounts.
TZS Series Candle filter features wide application, close operation, multi-function, large filter area, high dirt holding capacity, easy filter cake back-blowing and automatic running.
Candle filter element
Sub-series | TZS-W Series, TZS-V Series, TZS-S Series, TZS-G Series | Inlet and Outlet Size | 2"-24" |
Filtration Degree | 0.2-100μm, depending on the filter element and design | Housing Wet Part Material | Differential Pressure Transmitter, Filter Cake Thickness Detector, Liquid Level Switch, Flowrate Transmitter |
Standard Design Pressure | 0.6MPa/1.0MPa/1.6MPa/2.0MPa, higher pressure can be customized | Inside Surface Anticorrosion | Soft Sealing or Hard Sealing Butterfly Vavle |
Filter Element | V-slot slotted, metal-powder-sintered, woven cloth, metal-mesh-sintered, polymer membrane | Housing Sealing Material | NBR/VITON/Wound Gasket |
Max. Design Temperature | 0-300℃ | Filter Cake Discharging Valve | Vulcanized Rubber |
Flowrate Range | 10-300m³/h | Filter Cake Discharging Valve | 304/316L/CS, other material can be customized, such as 904L and duplex stainless steel |
Filtration Area | 0.9㎡-60㎡, larger size can be customized | Control System | PLC |
Housing Diameter | φ250-φ2500 | Back-blowing Valve | 0.2MPa-0.3MPa |
Fully automatic control, fully enclosed design and easy operation.
No consumables, automatically regenerated without replacement.
High filtration efficiency, micron-level filtration can be achieved.
The filter element grouping design reduces the gas consumption for each back-blowing and can isolate damaged filter elements.
It is capable of high-precision, high-solid content (up to 5%), and high-viscosity applications.
Can handle materials with high solid content same time enhances the adhesion performance and peeling performance of the filter cake during the cake removal period.
Application:
Filtration of decolorized activated carbon.
Recovery and filtration of catalysts.
Lithium ion electrolyte additive filtration.
Salt water refining pre coating filtration system.
Epoxy resin saltwater filtration.
Lithium ion electrolyte additive filtration.
Production of inorganic salts.
Plasticizers for removing alkaline salts.
FCC filtration in flue gas desulfurization.
Filtration of calcium sulfate in lactic acid.
![]() | ![]() | ![]() |